Giangarlo Scientific
  • sales@giangarloscientific.com

MINIATURE UV QUARTZ  PENCIL LAMPS

  • Miniature size and light weight make these lamps ideal for a wide variety of applications

  • Outstanding accuracy, reproducibility and stability

  • Rated life of 5,000 hours

  • Isolated spectral lines are strong and well separated

  • Fused-quartz envelope has excellent ultraviolet transmission

  • Double-bore construction has both electrodes at one end

  • Cool burning for use in instrumentation

The Spectroline® ultraviolet quartz pencil lamps cannot be beat for their small size, light weight and long life. They’re ideal for the widest range of applications. In fact, these features make Spectroline pencil lamps the most useful and versatile UV light sources of their type.

Spectroline quartz pencil lamps are small, low-pressure, mercury-vapor discharge lamps made of double-bore material with both electrodes at one end. They are very stable lamps, when used properly, and maintain a high output of ultraviolet radiation over thousands of hours. This long life and stability is especially important to instrument manufacturers incorporating these lamps into their equipment.

Spectroline pencil lamps have a spectral emission characteristic of a low-pressure mercury discharge consisting of many well-separated lines in the ultraviolet, visible and infrared parts of the spectrum (see Figures 1 and 2). They are widely used as spectral calibration sources in spectroscopy, chromatography and photometry, and a multitude of other laboratory and industrial applications.

11SC-1 Short Wave UV Lamp

Average Intensity — 4,500 µW/cm2 of 254nm (2537 A°U, 254mµ) radiation at 1″ (2.54cm).

Housing — The quartz tube is bonded inside a phenolic handle with Viton™ and a special insulating resin. A 24″ (61cm) ozone-resistant cord set with plug is provided for attachment to the Spectroline SCT-1A power supply.

Dimensions — The lighted length of the tube is 21⁄8″ (5.30cm), 1⁄4″ (0.65cm) OD. The handle is 3⁄8″ (0.95cm) OD and 5⁄16″ (0.79cm) ID. The total length of the lamp housing is approximately 5″ (12.7cm).

Operation — The lamp plugs into the Spectroline SCT-1A power supply.

Net Weight — 2 oz. (60g).

Light Shields — The 11SC-1 lamp is available with A, B and C shields as options (See Accessories).

 

11SC-2 Short Wave UV Lamp

Average Intensity — 2,000 µW/cm2 of 254nm (2537 A°U, 254mµ) radiation at 1″ (2.54cm).

Housing — Same as 11SC-1.

Dimensions — The lighted length of the tube is 3⁄4″ (1.91cm), 1⁄4″ (0.65cm) OD. The total length of the lamp housing is approximately 31⁄2″ (8.9cm).

Operation — Same as 11SC-1.

Net Weight — 11⁄2 oz. (40g).

Light Shields — Not available.

36-380 Long Wave UV Lamp

The Spectroline 36-380 pencil lamp is one of the smallest sources available of filtered, long wave ultraviolet (Black Light) radiation. It is basically the 11SC-1 lamp coated with conversion phosphors that absorb the 254nm line and convert this energy into a band peaking at 365nm. The lamp in encased in a tubular glass filter that absorbs visible light while transmitting maximum ultraviolet intensity. The 36-380 lamp is ideal for fluorescent penetrant analysis and boroscopic inspection in ordinarily inaccessible locations.

Average Intensity — 1,000 µW/cm2 of 365nm (3650 A°U, 365mµ) radiation at 1″ (2.54cm).

Housing — Same as 11SC-1.

Dimensions — The lighted length of the tube is 21⁄8″ (5.30cm), 3⁄8″ (0.95cm) OD. The total length of the lamp housing is approximately 51⁄4″ (13.34cm).

Operation — Same as 11SC-1.

Net Weight — 21⁄2 oz. (70g).

Light Shields — Not available.

 

SCT-1A Power Supply

The separately housed Spectroline SCT-1A power supply provides correct electrical characteristics for efficient operation of the 11SC-1, 11SC-2 and 36-380 lamps. The SCT-1A provides 1,200 volts open circuit for starting the lamps — considerably above the 800 volts needed. The 11SC-1 and 36-380 will operate at 295 volts and 18mA; the 11SC-2 will
operate at 205 volts and 18.5mA.

 

The dimensions of the SCT-1A are 41⁄2L x 4W x 31⁄8” H (11.4L
x 10.2W x 7.9cmH). The net weight is 5 lbs. (2.3kg). The metal
housing is provided with an on/off switch, rubber feet, a 71⁄2 ft.
(2.3m) primary cord and a 3 ft. (0.9m) secondary cord. It operates
on 115V AC/60Hz. A 230V AC/50Hz version is also available,
model SCT-1A/F.