TRANSUS
Transus Instruments is a manufacturer of accurate and efficient Ultrasonic Flowmeters and Ultrasonic Transducers. Transus offers reliable and precise gas flow measurement by using their patented Broadband Continuous Wave signal processing, which results in improved response time, signal to noise ratio and power usage. Transus offers low cost flowmeters and transducers that are highly accurate and intrinsically safe. Transus products are used in a variety of applications, such as:
Custody Transfer
Flare Gas
Shale and Coal Seam Gas
Landfill and Biogas
Process Gases
Transus Ultrasonic Gas UIM-4F Series Flow Meter
The UIM 4F has four paths as standard. It has been tested to meet the international standards for custody transfer metering including AGA-9 and OIMLR137 (class 0.5). Integration of the flow across the paths provides accurate measurement even with varying flow profiles caused by changes in flow velocity, gas composition and pressure or upstream pipe configuration. Fast response is maintained by the simultaneous transmission on more than one path using Broadband Continuous Wave processing. The measured flow profile provides a diagnostic tool. Should one path fail, the Path Substitution Algorithm uses historical flow data to continue reliable flow measurements until the path recovers or remedial action is taken.
Features & Benefits
3″ to 30″ Line Sizes
Class 150, 300, 600, and 900
Pressure ranges up to 15,513 kPa (2,250 psi)
-30 to 80°C (-22 to 176°F) Process Temperature
Typical Uncertainty 1% factory calibration, 0.5% flow calibration
0.1% Repeatability
Turndown Ratio 100:1 (pipe size dependent)
User interface 128×128 dot matrix LC Display, 4 keys
MODBUS (RS485 and USB) Communication Protocols
Transus Ultrasonic Gas UIM-3/3F Series Flow Meter
The new UIM-3 ultrasonic flowmeters use the patented Broadband Continuous Wave© signal process and high efficiency titanium transducers to provide reliable and precise flow measurement even in the most extreme applications.
Typical Applications
Allocation metering
Shale gas
Flare gas
Coal seam gas
Biogas
Landfill gas
Process gas
Features & Benefits
2″ to 16″ Line Sizes
Class 150, 300, and 600
Pressure ranges up to 10,204 kPa (1,480 psi)
-30 to 80°C (-22 to 176°F) Process Temperature
Typical Uncertainty 1% factory calibration, 0.5% flow calibration
0.1% Repeatability
Turndown Ratio 100:1 (pipe size dependent)
User interface 128×128 dot matrix LC Display, 4 keys
MODBUS (RS485 and USB) Communication Protocols
LPF Flare PSignature Series Ultrasonic Flowmeter
LPF series flowmeters are able to deliver accurate velocity, volumetric flow, and mass flow measurements over a large range of flow rates and in unsteady conditions. In addition, LPFX series flowmeters can calculate molecular weight for applications that require additional property measurements. LPF series flowmeters are designed for use in flare gas, vent gas, bio gas, fuel gas, and process gas applications and are suitable for use with varying gas composition. Flowcell sizes varying from 1 – 96 inches are available for ASME CLASS 150 – 600. Typical velocity reading accuracy is ±2.0% from 0.3m/s to 50m/s and ±5.0% from 0.3m/s to 120m/s with ±0.5% repeatability of reading. PROCON SYSTEMS flowmeters meet all applicable North American codes and standards and can be certified based on the needs of the customer and installation location. PROCON SYSYTEMS has been designing and servicing flowmeters for over 25 years and continues to combine engineering experience with new and proven technologies to provide the best solutions for the customer. All flowmeters come fully assembled and are tested and inspected before shipment.
Features
Flowrate: 0.03m/s – 120m/s
Flowcell Size: 1-96 inches
ASME Rating: CLASS 150-600
Molecular weight calculations
High turndown ratio
On-line transducer insertion and removal option
Single and dual path options
Addition input/output options
Data logging options
Additional certification and testing options
LPF Flare PSignature Series Ultrasonic Flowmeter
LPF series flowmeters are able to deliver accurate velocity, volumetric flow, and mass flow measurements over a large range of flow rates and in unsteady conditions. In addition, LPFX series flowmeters can calculate molecular weight for applications that require additional property measurements. LPF series flowmeters are designed for use in flare gas, vent gas, bio gas, fuel gas, and process gas applications and are suitable for use with varying gas composition. Flowcell sizes varying from 1 – 96 inches are available for ASME CLASS 150 – 600. Typical velocity reading accuracy is ±2.0% from 0.3m/s to 50m/s and ±5.0% from 0.3m/s to 120m/s with ±0.5% repeatability of reading. PROCON SYSTEMS flowmeters meet all applicable North American codes and standards and can be certified based on the needs of the customer and installation location. PROCON SYSYTEMS has been designing and servicing flowmeters for over 25 years and continues to combine engineering experience with new and proven technologies to provide the best solutions for the customer. All flowmeters come fully assembled and are tested and inspected before shipment.
Features
Flowrate: 0.03m/s – 120m/s
Flowcell Size: 1-96 inches
ASME Rating: CLASS 150-600
Molecular weight calculations
High turndown ratio
On-line transducer insertion and removal option
Single and dual path options
Addition input/output options
Data logging options
Additional certification and testing options
Factory trained service technicians and stocked parts to minimize downtime.