Giangarlo Scientific

NEW! Now available with regular or diaphramless generator cell at the same price. No more clogged generator frit or cleaning ever! Uses new single part pyridine and chloroform free reagent.

The standard diaphram type generator is recommended when the vaporizer is used, when the total amount of water measured is very small (less than 100 ug), or where the more aggressive solvent action of the pyridine or pyridene free reagents is needed.


  • Full-featured, user-friendly operating system, multiple RS-232C ports for system expansion, simultaneously interfacing both a balance and a computer.
  • Quick and accurate moisture analysis, provides maximum isolation of solutions from atmospheric moisture.
  • Optional Vaporizer analyzes challenging materials, like lyophilized proteins, pharmaceutical powders or biomedical, pharmaceutical and plastic industry solids.
  • Photovolt’s Karl Fischer reagents, available in kit and bulk packaging.
  • GLP software, includes
    statistics, diagnostics and reagent monitoring packages.
  • CE-Mark compliant,
    ISO 9001/EN 46001 Registered
  • Direct interface to Ohaus Adventurer and Analytical Plus and other balances available from Photovolt at reduced package prices when purchased with the 2010

Method Microporcessor Controlled Karl Fischer Coulometric Titrimetry
Detection: Constant Current Polarization Detection
Titration Control: Automatic Electrolysis Current Control
Titration Rate: Max. 2400 µg H2O/min., microprocessor controlled
Background Compensation: Automatic Correction, Full-time Display (µg H2O/sec)
Measuring Range: 10 µg to 100 mg H2O
Sensitivity: 0.1 µg H2O
Precision: ± 3 µg for 10 µg to 1 mg H2O, C.V. = 0.3% or less for ›5000 µg H2O
Display: Large 20 Character LCD
Files: 8 Titration Files, 99 Sample Data Points
Calculation: Concentration (µg, %, ppm, mg/L), Mean, Standard Deviation, Coefficient of Variation
Printer: 21-digit Thermal Dot Matrix Printer, Paper Width 57 mm

Standard Built-in RS-232C Dedicated Balance Interface, Ohaus Adventurer and Analytical Plus balances are available from Photovolt with everything you need to interface with the 2010. Call or email for specially reduced package price when purchased with the 2010.

Standard Build-in RS-232C Computer Interface

Auxiliary Functions: Self-Diagnostics, Reagent Consumption Indicator, Data Recalculation, Power off Memory-2-month Operation after Full Charge, GLP formatted Data Output
Sample Introduction: Vertical and Angled Sample Ports. Indirect: Optional Vaporizer
Power Requirement: AC 100V, 115V, 220V, 240V, 50/60Hz, 160VA

Approx. 450 mm (W) x 335 mm (D) x 140 (H)

17.75″ (W) x 13.25″ (D) x 5.5″ (H)

Weight (Packed): Approx, 8.6 kg (18.75 lbs.)









Temperature Range: 50°C to 300°C (at an ambient temperature of 25°C)
Oven Type: Transparent Electro-Conductive Glass, 120 VA
Sample Capacity: Up to 10 grams (depends upon sample matrix)
Measurable Range: From 5 ppm
Gas Requirements: 100 to 500 mL/min Nitrogen Supplied at 2 kg/cm²g (30 psi)
Sample Introduction: Automatic Sample Boat Loader
Moisture Transfer: Via Heated Gas Transfer Line (105°C)
Blank Reduction: Via Automatic Moisture Purge System

Approx. 508 mm (W) x 203 mm (D) x 178 mm (H)

20″ (W) x 8″ (D) x 7″ (H)

Weight (Packed): Approx. 6.1 kg (13.25 lbs)