BIB-150P | CH-50P/12 | SB-100P | SB-100PY | FC-100 | FC-150 | High-Intensity | UV Lamps | Clinical Life Science


SB-100PY SEMICONDUCTOR WAFER INSPECTION LAMP

  • For fast non-destructive detection of particulate matter as small as 10 microns
  • Efficiently detects contamination early in manufacturing, saving valuable production time and unnecessary expense
  • The 100-watt bulb emits strong mercury lines at 546, 577 and 579nm
  • A special yellow filter blocks the emission of wavelengths shorter than 50nm, protecting against activation of the photoresist

 


SB-100PY
  • Equipped with your choice of two bulbs, each with a rated life of 5,000 hours: the spot bulb provides a concentrated beam of light, while the flood produces a broader, lower-intensity beam
  • Unique impact-resistant and dent-proof housing made of a super-tough engineering polymer
  • Flexible silicone rubber filter lens holder allows quick and easy bulb replacement without tools!

The lamp comes with 100-watt bulb, 8-ft primary cord and 8-ft secondary cord.

SPECIFICATIONS

SB-100PY

Voltage Requirements

120, 230, 240, and 100V versions

Bulb Rating

100 watts

Operation

5-minute warm-up time

Lamp Head Diameter
   x Length of Housing

6 1/2" (16.5cm) x 7 1/2" (19cm)

Weight

2 1/2 lbs (1.1kg); 11 1/2 lbs (5.2kg) with transformer base

Cord Length

Two 8 ft (2.5m)
Optional: 20 ft (6m)

 

Giangarlo Scientific | Analytical | Environmental | Clinical Life Science | Process | Safety | Wastewater | Service | Contact Us

Giangarlo Scientific Co, Inc.
162 Steuben Street - Pittsburgh, PA  15220
1-800-229-8850 - (412) 922-8850 - (412) 922-9047 FAX