Model 106F PTFE Flo-Sensor
Description
The Model 106F Flo-Sensor will precisely measure flow rates of
virtually any low-viscosity fluid, as low as 15 mL/minute or as
high as 50 L/minute (13 GPM). Repeatable results are achieved by
utilizing a patented Pelton-type microturbine wheel. This proven
design will not contaminate your processes, but continues to
provide precise results even after many years of service.
Machined flare-type fittings provide easy connection and eliminate all threads from the fluid stream. Electrical connections are made via the included 6 foot cable. Several power and signal configurations are available for a wide range of applications.
By limiting the wetted surfaces of the 106F to Teflon® PTFE brand resin, Kal-Rez®, and sapphire, it can be used to measure almost any low-viscosity fluid, including hydrofluoric and other acids, solvents, and alkalines.
Wetted
Parts
Wetted
Parts: Teflon® PTFE brand resin, Kal-Rez®, and
sapphire.
Ranges
| Model Number | Flow Range | Max. Pressure Drop | Standard Fittings | Dimensions, no fittings |
| 106F-3 | 15-100 mL/minute | 12 psi | 1/4" flare | 3.57"x2.25"x2.10" |
| 106F-4 | 20-200 mL/minute | 10 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-5 | 50-500 mL/minute | 10 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-6 | 100-1000 mL/minute | 6 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-7 | 200-2000 mL/minute | 10 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-8 | 400-5000 mL/minute | 10 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-9 | 1.0-10.0 L/minute |
10 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-20 | 3.0-20.0 L/minute |
3 psi | 3/4" flare | 5.00"x2.85"x4.10" |
| 106F-30 | 4.0-30.0L/minute | 4 psi | 3/4" flare | 5.00"x2.85"x4.10" |
| 106F-50 | 7.0-50.0L/minute | 10 psi | 3/4" flare | 5.00"x2.85"x4.10" |
| 106F-5G | 1.0-10.0 GPH | 12 psi | 3/8" flare | 3.57"x2.25"x2.10" |
| 106F-8G | 10-100 GPH | 12 psi | 3/8" flare | 3.57"x2.25"x2.10" |
Options and Accessories
Output
Options- All 106F Flo-Sensors come standard with an
integrated 6-foot long, 4 conductor, PVC-jacketed cable. This
cable provides both power and signal connections. Seven power and
signal configurations are available:
| Configuration Suffix | Power Requirement | Output |
| A | 12-15 VDC, 55 mA | Pulse (Passive BOSFET) |
| B | 22-25 VDC, 55 mA | Non-isolated 0-5 VDC |
| C | 15-25 VDC, 75 mA | Non-isolated 4-20 mA |
| D | 22-25 VDC, 55 mA | Non-isolated 0-5 VDC |
| E | 22-25 VDC, 50 mA | Pulse (Passive BOSFET) |
| J | 22-25 VDC, 55 mA | Non-isolated 0-10 VDC |
| K | 12-15 VDC, 55 mA | Non-isolated 0-10 VDC |
Select your output when ordering by adding the appropriate
configuration suffix(i.e., 106F-3B, or 106F-30C).
Output must be selected when ordering; outputs are not field
selectable.