Model 106 PTFE Flo-Sensor
Description
The Model 106 Flo-Sensor provides accurate flow measurement of
even the most corrosive chemicals. The advanced turbine design
provides almost instantaneous response , and if the turbine is
not spinning, you don’t receive an output -- no zero drift!
The combination of Teflon® PTFE brand resin, Kal-Rez®, and
sapphire provide wetted surfaces compatible with almost any low
viscosity fluid - from solvents to hydrofluoric acid. Many output
configurations are available. Standard units come with a 6-foot
cable, terminated in pigtail leads. Order a 106 today and see the
benefits of precision monitoring of your flow rates today!
Wetted
Parts
Wetted
Parts: Teflon® PTFE brand resin, Kal-Rez®,
and sapphire.
Ranges
| Model Number | Flow Range | Max. Pressure Drop | Standard Fittings | Dimensions, no fittings |
| 106-3 | 15-100 mL/minute | 12 psi | 1/8" tube | 2.16"x1.87"x2.3" |
| 106-4 | 20-200 mL/minute | 10 psi | 1/4" tube | 2.16"x1.87"x2.3" |
| 106-5 | 50-500 mL/minute | 10 psi | 1/4" tube | 2.16"x1.87"x2.3" |
| 106-6 | 100-1000 mL/minute | 6 psi | 1/4" tube | 2.16"x1.87"x2.3" |
| 106-7 | 200-2000 mL/minute | 10 psi | 1/4" tube | 2.16"x1.87"x2.3" |
| 106-8 | 400-5000 mL/minute | 10 psi | 3/8" tube | 2.16"x1.87"x2.3" |
| 106-9 | 1.0-10.0 L/minute | 10 psi | 3/8" tube | 2.16"x1.87"x2.3" |
| 106-5G | 1.0-10.0 GPH | 12 psi | 1/4" tube | 2.16"x1.87"x2.3" |
| 106-8G | 10-100 GPH | 12 psi | 3/8" tube | 2.16"x1.87"x2.3" |
All units calibrated with deionized water.
Options and Accessories
Output
Options- All 106 Flo-Sensors come standard with an integrated
6-foot long, 4 conductor, PVC-jacketed cable. This cable provides
both power and signal connections. Seven power and signal
configurations are available:
| Configuration Suffix | Power Requirement | Output |
| A | 12-15 VDC, 55 mA | Pulse (Passive BOSFET) |
| B | 22-25 VDC, 55 mA | Non-isolated 0-5 VDC |
| C | 15-25 VDC, 75 mA | Non-isolated 4-20 mA |
| D | 22-25 VDC, 55 mA | Non-isolated 0-5 VDC |
| E | 22-25 VDC, 50 mA | Pulse (Passive BOSFET) |
| J | 22-25 VDC, 55 mA | Non-isolated 0-10 VDC |
| K | 12-15 VDC, 55 mA | Non-isolated 0-10 VDC |
Select your output when ordering by adding the appropriate
configuration suffix(i.e., 106-3B, or 106-30C).
Output must be selected when ordering; outputs are not field
selectable.
MSB Devices - The MSB devices allow the Model 106 to provide other outputs, in addition to its standard BOSFET pulse output. Order one MSB per Model 106, and MSB devices must be ordered with 106. All MSB units allow Model 106 to be powered with 24VDC. Use MSB units with 106 suffix A.
MSB-1: Order to power 106 with 24VDC; standard opto-isolated BOSFET pulse output
MSB-2: Linearized 0-5VDC output
MSB-3: Linearized 4-20 mA output, non-isolated
MSB-4: Standard BOSFET pulse, with 1/2, 1/3 or 1/4 pulse divider
MSB-5: Linearized 4-20 mA output, isolated