Shale Gas Industry Home         

Leakwise ID-227 for Marine Applications

lw monobuoy install 270 The Leakwise ID-227 Sensor for marine
applications can handle waves up to 2 m (6 ft).

The Leakwise ID-227 Oil Sheen Sensor is designed for installation at offshore oil tanker buoy terminals, jetties, and piers to detect floating oil sheens resulting from oil spills or leaks occurring during the loading and offloading process. Additional applications include detecting and monitoring floating hydrocarbons in lagoons, lakes, rivers, open channels, large retention ponds, and near offshore oil rigs.

The ID-227 System consists of a:

The wave rider float is designed to maintain the position of the detecting antenna at the liquid/air interface, despite fluctuations in the water level due to waves and tide. It has two field adjustable alarm points:

The ID-227 detects from 0.3 to 20 mm of
hydrocarbon on water or brine.

Leakwise ID-227 Specifications

The Leakwise ID-227 Oil-on-Water Monitoring System is a wired model for marine applications. The sensor is connected with a cable to the PS-220 Analog Controller. (For wireless operation, see the ID-227WL Specifications page.) Specifications include:

ID-227 Operating Range
Detection Range                                    0.3–20 mm (0.01–0.79 in) of hydrocarbon on water or brine
Working Wave Height                           Maximum 2 m (6.6 ft)
Tide Range                                             Unlimited
Current                                                    Up to 4 knots (6.8 ft/sec); for higher current — consult factory
Minimum Liquid Depth                          30 cm (~12.0 in)
Working Temperature                            0–70° C (32–158° F)
Survival Conditions                                Extreme sea conditions