 |
| |
| The Dräger Polytron 3000
transmitter is an intrinsically safe gas detector
for continuous monitoring of toxic gases and
oxygen in ambient air. |
| |
| The compact housing consists of two
parts: the "Polytron Docking Station"
and the "Polytron 3000" device. |
| |
| This two component concept and quick
lock mechanism provides greater flexibility and
simplicity for installation. |
| |
| Designed for one-man calibration the
Polytron 3000 can either accept a pre-calibrated
sensor or the sensor can be calibrated with the
unit. |
|
 |
| |
| The Dräger Polytron 7000 is able to
meet the requirements of the compliance market as
well as the high specifications of customized
solutions for the high end market. It is an
intrinsically safe gas detector that can satisfy
all toxic and oxygen gas measurement applications
on a single platform. |
| |
| Developed with an innovative modular
design, there is now the flexibility to choose
only the features that your application requires.
|
| |
- Display or without display
- Analog 4 to 20 mA
communication
- Digital HART communication
- Sensor Test Software Dongle
- Sensor Diagnostic Dongle
- Internal Pump *
- Integrated Relay *
- Remote Sensor (up to 30m /
100ft.)
- Duct Mount Kit
- Palm Pilot communication
|
| Upgrading after the unit has been
installed, to a higher specification by simply
adding a module allows the Dräger Polytron 7000
to develop in line with changing application
requirements. |
| |
| * These modules are not certified
for the use in hazardous areas. |
|
 |
| |
| The Polytron 2 transmitter is an
intrinsically safe gas detector for continuous
monitoring of toxic gases and oxygen in ambient
air. |
| |
| The transmitter uses
state-of-the-art microprocessor technology to
convert the signal from an electrochemical
DrägerSensor to a 4 to 20 mA analog or a HART
digital signal output. |
| |
| The unit is designed for one-man
calibration, and offers a variety of diagnostics
and self test features. |
| |
| The configuration and calibration of
the transmitter is menu guided and easy to
perform, using either the built in push buttons
or a HART hand held terminal. |
|
 |
| |
| The Polytron 2 XP Tox is an
explosion proof gas detector for continuous
monitoring of toxic gases and oxygen in ambient
air. |
| |
| The transmitter uses
state-of-the-art microprocessor technology to
convert the signal from an electrochemical
DrägerSensor to a 4 to 20 mA analog or a HART or
RS485 digital signal output. |
| |
| The unit is designed for one-man
calibration, and offers a variety of diagnostics
and self test features. |
| |
| The configuration and calibration of
the transmitter is menu guided and easy to
perform, using either the infrared remote
control, the built in push buttons or a HART hand
held terminal. |
| |
| With the optional on-board relays,
Polytron 2 XP Tox can be operated as a
”stand alone” unit. |
|
 |
| |
| The Polytron TX is an explosion
proof gas detector for continuous monitoring of
toxic gases and oxygen in ambient air. |
| |
| The transmitter uses industry
standard two-wire loop powered analog technology.
|
| |
| It converts the signal from an
electrochemical DrägerSensor to a 4 to 20 mA
signal that is proportional to the actual gas
concentration. |
| |
| This universal transmitter can be
configured for H2S, CO, and O2 or customized for
other gases* like Cl2, NH3, NO2, SO2. |
| |
| The unit is designed for one-man
calibration and easy to operate. |
| |
| * Not available in explosion proof |
|
 |
| |
| The Polytron IR CO2 is a gas
detector for continuous monitoring of carbon
dioxide in ambient air. The measuring range can
be adjusted from 0-2000 ppm up to 30 Vol%. |
| |
| The transmitter uses
state-of-the-art microprocessor technology to
convert the signal from an infrared DraegerSensor
to a 4 to 20 mA analog signal output. |
| |
| The unit is designed for one-man
calibration, and offers a variety of diagnostics
and self test features. The configuration and
calibration of the transmitter is menu guided and
easy to perform, using the built-in push buttons.
|
|
