 |
| |
| The MasterStation is the control
center of the Dräger E-Cal system. It supports
up to 10 instrument modules at once and is
available in 2 different versions. The
MasterStation 6 controls a maximum of six
different gases, the MasterStation 12 up to
twelve. |
| |
| The MasterStations are computer
controlled and ensure that any testing and
calibration is carried out fast, efficient and
with the utmost degree of accuracy. |
| |
| The control center can communicate
bidirectional and simultaneously supports
different instrument types. This means the number
of configuration possibilities of Dräger E-Cal
is almost infinite. |
|
 |
| |
| The instrument module establishes
the communication between the gas detection
device and the MasterStation/PC. It automatically
detects when an instrument is put in and reports
this event to the control software CC-Vision
Dräger E-Cal. |
| |
| The instrument module controls the
gas supply so that an adequate gas flow to the
instrument is always ensured. |
| |
| The test or calibration result is
displayed as well. Moreover, the instrument
module can also be used in combination with the
regular instrument wall plug charger to recharge
the unit. Following instrument modules are
available: |
| |
- MultiWarn II
- MiniWarn
- Pac III
- Pac Ex 2
|
|
|
| Every instrument module can be
operated manually and independent of the
MasterStation and utilized as an economic
alternative for simple instrument bump tests. |
|
