 |
| |
| Using the Dräger silica gel tubes,
hazardous substances in the air are collected
using a suitable medium via adsorption or
chemisorption. The sample is then analysed in the
laboratory by means of various analytical methods
like gas chromatography (GC), high performance
liquid chromatography (HPLC), UV-VIS photometry,
or IR spectroscopy. |
|
 |
| |
| Using the Dräger activated charcoal
tubes, hazardous substances in the air are
collected using a suitable medium via adsorption
or chemisorption. The sample is then analysed in
the laboratory by means of various analytical
methods like gas chromatography (GC), high
performance liquid chromatography (HPLC), UV-VIS
photometry, or IR spectroscopy. |
|
 |
| |
| The Dräger-Bio-Check Allergen
Control rapid-test allows the user to conduct an
on-site analysis of house dust mite allergens.
The table supplied with Dräger-Bio-Check
Allergen Control groups the exposure levels into
categories based on the scientific limit values
for house dust allergens. |
| |
| Instructions for use: |
| |
- Remove test from packaging
- Wipe the Dräger-Bio-Check
Allergen Control for one minute over the
surface of the object in question (e.g.
mattress, upholstery, carpet) to collect
dust
- Drip the solution supplied
with the product onto the sample. After
10 minutes the colour change will reveal
the allergen concentration.
|
|
 |
| |
| Dräger-Bio-Check F is an
enzyme-based badge measurement system for
conducting guideline measurements of formaldehyde
which can be used without any additional
accessories. Dräger-Bio-Check F has been tested
by a number of organizations, including in
Germany, TÜV, Stiftung Warentest and Ökotest:
'Dräger-Bio-Check F is suitable for guideline
formaldehyde measurements - especially for
laypersons' (test 6/95). |
| |
| Instructions for use: |
| |
- Press start button
- Position instrument in room
- After 2 hours, check results
against enclosed colour comparison strip
|
|
 |
| |
| Dräger-Bio-Check Ozone is used to
measure ozone concentrations both indoors and
out. The results can be checked after 10 or 20
minutes using a colour chart. Dräger-Bio-Check
Ozone allows ten measurements. The German product
testing foundation ”Stiftung Warentest”
states: ”Dräger-Bio-Check Ozone is suitable
for guideline ozone measurements - especially for
laypersons” (test 6/95). |
| |
| Instructions for use: |
| |
- Insert an ozone measurement
paper into the holder
- Position instrument either
inside or out
- After 10 minutes (outdoors)
or 20 minutes (indoors), check result
against the colour code printed on the
holder
|
|
|
|
