WESCOR
SLIDE HEATER WESCOR
SLIDE HEATER
| SlidePro® 15 Slide Heater
|
|
Slide Heater Capacity |
1 to 15 slides (Vertically Stacked Configuration). |
|
Dimensions (W x H x D) |
13 cm x 20 cm x 10.5 cm |
|
Weight |
1.58 kg (3 lb. 8. oz.). |
|
Temperature Adjust |
Front panel dial adjustment. |
|
Temperature Range |
40 to 100 °C |
|
Temperature Stability |
± 5% |
|
Temperature Recovery |
3 Min. after fully loaded. |
|
Temperature Indicator |
Top panel access for a thermometer (.312" aperture). |
|
Power Indicator |
Front panel green power LED. |
|
Power Control |
Front panel rocker power switch. |
|
Electrical Requirements |
100 to 120 volt or 220 to 240 volt @ 50 to 60 Hz. |
| Fusing |
For 120 volt use a 3 amp Type T (1 required). |
| Power Consumption |
150 watts maximum. |
|
Safety Features |
Double fault electrical construction, shielded heater element, four non-skid rubber feet. |
|
Certifications |
UL listed under UL3101-1. |
|
|
|
| Buyer's
Specifications
The
slide heater shall be a Wescor Model SlidePro 15 Slide Heater or
equivalent and shall heat-fix specimens to microscope slides for uniform
fixation. The slide heater shall have a vertical stack design and hold up
to 15 slides in a 4 x 5 inch footprint.
The slide heater shall be temperature controlled and operate between 40 to 100øC. The slide heater shall have a thermometer port that will allow users to monitor temperature settings with a thermometer. The slide heater shall consume no more than 150 watts of electrical power and shall weigh less than 1.6 kg. |
|
Giangarlo
Scientific | Analytical | Environmental | Life Science | Process | Safety | Wastewater | Service | Contact
Us
The
compact SlidePro Slide incubator heat fixes specimens to slides for
uniform fixation.