Model 80, 80S, 80D & 80SD Mass Flo-Controllers
Units shown with optional acetal fittings. Brass fittings standard on 80/80D.
With all of the mass flow controllers on the market, it can be difficult to decide which is best for your application. Well, if your application is for an inert, non-corrosive gas, and you require fast performance and a low price, then the McMillan Mass Flo-Controllers fit the bill. High quality, all metal construction (instead of plastic) guarantees you won’t strip any threads. Advanced coil design prevents zero drift, which means your setpoints will always produce the same flow rates. The Model 80S and 80SD are constructed from stainless steel for enhanced chemical compatibility.
The Model 80D and 80SD adds an integrated 3½ digit flow rate display. Also, customers may order the Model 80D/80SD calibrated for up to three gases (one is standard, each additional incurs added charges). If the Model 80D/80SD has been programmed at the factory for multiple gases, the user may select which gas the unit is measuring simply by setting the switches on the front panel. In addition, the 80D/80SD also allows the user to select internal or external setpoint — two dials (coarse and fine) are provided for setting the internal setpoint. External setpoint input for both Model 80 or 80D is 0-5VDC.
A cable assembly or option package is required for operation (see below).
80S/80SD Wetted Parts: 303, 304, & 316 stainless steel and epoxy. Stainless steel fittings standard.
80/80D Wetted Parts: Anodized aluminum, stainless steel, brass, Viton® O-rings. Brass fittings standard. Stainless steel fitting upgrade available at an added cost; acetal fittings available at no extra charge.
Dimensions, all flow ranges (excluding fittings):
Model 80/80S — 3.17″x1.03″x3.80″
Model 80D/80SD — 3.17″x1.03″x5.26″
|80||80S||80D||80SD||Flow Range||Desired Differential Pressure||Standard Fittings|
|80-3||80S-3||80D-3||80SD-3||0-50 mL/minute||15-40 psi||1/8″ tube|
|80-4||80S-4||80D-4||80SD-4||0-100mL/minute||15-40 psi||1/8″ tube|
|80-5||80S-5||80D-5||80SD-5||0-200 mL/minute||15-40 psi||1/8″ tube|
|80-6||80S-6||80D-6||80SD-6||0-500 mL/minute||15-40 psi||1/8″ tube|
|80-7||80S-7||80D-7||80SD-7||0-1000 mL/minute||15-40 psi||1/8″ tube|
|80-8||80S-8||80D-8||80SD-8||0-2.0 L/minute||15-40 psi||1/4″ tube|
|80-9||80S-9||80D-9||80SD-9||0-5.0 L/minute||15-45 psi||1/4″ tube|
|80-10||80S-10||80D-10||80SD-10||0-10.0 L/minute||15-45 psi||3/8″ tube|
NIST Calibration Certificate included with Model 80D/80SD, and is optional for Model 80/80S at an added cost.
All units calibrated for air unless specified; certain unusual gases or blends may incur added costs. Call for details.
Units also available calibrated to English (SCFH) units; call for details.
Options and Accessories
Model 90 & 91 In-Line Filter – 20 micron filtering. Order Model 90 for ranges 3-7; Model 91 for ranges 8-10.
50-C-X Cable Assembly – 3 foot long cable terminated with pigtail leads. Includes all cables for input/output.
C-115VAC Option Package – Includes 115VAC (USA) power adapter and all cables required for input/output.
C-230VAC Option Package – Includes 230VAC (Europe) power adapter and all cables required for input/output.