S-111, S-112, & S-114 Flo-Meters
Description
For liquid flow metering with integrated rate display, the
S-Series Flo-Meters have been setting the pace. Their
advanced Pelton-turbine design provides large turn-down ratios,
fast response, and repeatable accuracy. Combined with an
affordable price, you cannot beat their value. A 0-5VDC
analog output is standard.
If you require an inexpensive plastic flow meter to measure flow rates, the S-111 Flo-Meter is the answer. Including an analog 0-5VDC output and a 3 1/2 digit display of flow rate in engineering units, these flow meters are perfect for any laboratory or test facility.
For higher
pressure applications or where metal may be required, the Model
S-112 & S-114 may be the solution. Both are rated to 500
psig. The S-112 is made from brass, whereas the S-114 features a
stainless steel flow body. The S-114 also features enhanced ±1%
accuracy for critical applications, and comes standard with an
NIST certificate.
Wetted
Parts
Either a cable assembly or power adapter is required for
operation (see below).
S-111:
Ryton®, acetal, sapphire, glass, epoxy, Viton®
O-rings and acetal fittings standard.
S-112: Brass, Ryton®, acetal, sapphire, glass, epoxy,
Viton® O-rings and brass fittings standard.
S-114: 316L stainless steel, Ryton®, acetal,
sapphire, glass, epoxy, Viton® O-rings and SS
fittings standard.
EPDM O-rings are available instead of Viton® on any
unit at an added cost - use suffix "Q".
Ranges
Dimensions (not including fittings): 1.88"x3.00"x1.75"
| S-111 | S-112 | S-114 | Flow Range | Max. Pressure Drop | Standard Fittings |
| S-111-3 | S-112-3 | S-114-3 | 13-100 mL/minute | 10 psi | 1/8" tube |
| S-111-4 | S-112-4 | S-114-4 | 20-200 mL/minute | 10 psi | 1/4" tube |
| S-111-5 | S-112-5 | S-114-5 | 50-500 mL/minute | 10 psi | 1/4" tube |
| S-111-6 | S-112-6 | S-114-6 | 100-1000 mL/minute | 6 psi | 1/4" tube |
| S-111-7 | S-112-7 | S-114-7 | 0.2-2.0 L/minute | 10 psi | 1/4" tube |
| S-111-8 | S-112-8 | S-114-8 | 0.4-5.0 L/minute | 10 psi | 3/8" tube |
| S-111-9 | S-112-9 | S-114-9 | 1.0-10.0 L/minute | 10 psi | 3/8" tube |
| S-111-5G | S-112-5G | S-114-5G | 1-10 GPH | 12 psi | 1/4" tube |
| S-111-8G | S-112-8G | S-114-8G | 10-100 GPH | 12 psi | 3/8" tube |
Options and Accessories
100-17 Cable Assembly - 30 inch, 3-wire cable with pigtail leads. Connections for 12VDC power and signal.
S-PS-08 Power Adapter - 115 VAC(USA) power adapter. Plugs into standard wall outlet, with signal output leads.
S-PS-18 Power Adapter - 230 VAC(Eur) power adapter. Plugs into standard wall outlet, with signal output leads.
110-00-17 Base (S-111 only) - Allows the S-111 to stand by itself. Includes mounting hardware.