SS505 Discrete Stormwater Sampler

Automated Stormwater Sampler

 FEATURES:
  • Easy to operate - no programming required
  • Meets state and federal stormwater regulations
  • Rugged, lightweight, and easy to install
  • Auto-drain raingauge resets daily
  • Battery will power the sampler for several months and/or storm events before requiring charging
  • Peristaltic pump eliminated sample contamination
  • Easily secured against theft
  • Not damaged by water, moisture, or sever conditions (all circuits are epoxy-coated for moisture protection)
  • Sample bottle is equipped to automatically prevent overflow
  • Reliable and easy stormwater sampling based on rainfall and/or water level
  • Options for larger and composite samples

 

Product Description

Global Water's SS505 Stormwater Sampler is designed specifically to meet federal and state storm water sampling requirements.  The Stormwater Sampler takes a discrete sample, filling the one liter sample bottle, based on rainfall and/or water level.  The SS505 can be easily installed and set up in any storm water channel to take and store water samples during a storm event.

The Global Stormwater Sampler consists of a rugged, rainproof, and lockable carrying enclosure.  Inside the enclosure is a 1.0 liter polyethylene sample bottle, a peristaltic sampling pump, a logic timer/controller, and a rechargeable 5 Ah gel cell battery.  Also provided is the auto-drain rain gauge, sampler pickup hose and a battery charger.  Everything you need is provided for a successful sampling program.  Electronic circuits are fully encapsulated in epoxy, which eliminates failure due to moisture.

The SS505 Stormwater Sampler also includes two water sensors.  One water sensor can be used with the included auto-drain rain gauge to sample at a specified rainfall total.  The other sensor can be used to start the sampler when water flow through a channel reaches a specific point or height in the channel.  The sampler can be configured so either or both sensors will start the sampler.

The auto-drain rain gauge drains the water in the rain gauge every 24 hours so that sampling is based on daily rainfall

Specifications

Sample Size: First Flush, 1 L polyethylene bottle
Size : 7"L x 13"W x 17"H
Operating Temperature : 0-70°C
Weight : 15 lb (Shipping Weight 17 lb)

Materials
Enclosure:  Expanded UV protected PVC
Bottle:  1 Liter
Sample Hose:  Polyethylene
Sample Hose: 15' Nylon Reinforced 1/4" ID polyethylene flexible tubing
Water Level Sensors: Solid state with a 15' cable
Battery: Rechargeable 12V 5AH Gel Cell

Sample Pump
Flow rate:  1,000 ml per minute at 4 feet head
Maximum lift:  22 feet
Type:  Peristaltic