UltraFoam | Benefits | Specifications


Density Analyzers


UltraFoam Specifications

Specifications are based on clean, dry, thermally equilibrated samples and filled sample cells.
SAMPLE CELLS:   ACCURACY REPRODUCIBILITY
     Large, 135 cc:   better than ± 0.02% better than ± 0.01%
   Medium, 50 cc:   better than ± 0.03% better than ± 0.015%
      Small, 10 cc:   better than ± 0.03% better than ± 0.015%
     
SAMPLE SIZE:   0.1 to 135 cm3
PRECISION:   0.0001 g/cm3
GAS:   High purity nitrogen, SF6, helium or other non-corrosive gas
PRESSURE:   Programmable from 2 to 18 psig, fixed or stepwise
PURGE MODES:   Flow (adjustable) or pulse
CALCULATIONS:   Geometric volume (cc) from cube or cylinder dimensions
Compression %, Fracture % versus pressure change
Open Cell%, Closed Cell% (raw or corrected by tri-section)
Solid Volume, Solid Density
OUTPUT:   Printer and RS232 port
MEMORY:   Long term retention of calibrations, run parameters and last run data
POWER:   100 - 240 VAC, 50/60 Hz
WEIGHT:   21.5 lbs. / 9.75 kg
DIMENSIONS:   Width: 9.5"/ 24.1 cm;
Depth: 17.0"/ 43.2 cm		 Height: 8.6"/ 21.9 cm

Giangarlo Scientific | Analytical | Environmental | Life Science | Process | Safety | Wastewater | Service | Contact Us