C102 Your Complete Tool for Water Analysis: Turbidity, Chlorine, pH, Bromine, Iron, Iodine & Cyanuric Acid

  • USEPA Compliance In the turbidimetric mode, C 102 uses the nephelometric principle according to USEPA's 180.1 method and the Standard Method 2130B.
  • Good Laboratory Practice (GLP) With a built-in clock, you can check the last calibration date at a touch of a button to guarantee best performance for your meter.
  • Custom Calibration Points Hi-tech electronics allow the operator to calibrate the meter at a selectable point in from 0.00 to 50.00 NTU*.
  • Logging Capability C 102 makes it possible to log and retrieve up to 25 different samples.
  • Economical C 102 is the most competitively price meter around.
 

The most important parameters needed for water analysis, specially in drinking water, are now available through a portable meter. You can obtain lab performance in the field by using C 102. It not only measures turbidity, but also pH, Total and Free Chlorine, Bromine, Iodine, Low Iron and Cyanuric Acid (CYS). All this in the palm of your hand and in seconds!

Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor. In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample. Up to 25 measured samples can be stored in memory together with time and date. Miniaturization of the electronics has made it possible to offer unsurpassed accuracy and quality in a portable unit weighing just one pound!

C 102 portable water analysis meter is supplied with measurement cuvet & cap, 4 x 1.5V AA Batteries and instruction manual.

Specifications: C 102
Range Turbidity 0.00 to 9.99 NTU & 0.0 to 50.0 NTU*
Bromine 0.00 to 8.00 mg/L
Free Chlorine 0.00 to 2.50 mg/L
Total Chlorine 0.00 to 3.50 mg/L
Cyanuric Acid 0 to 80 mg/L
Iodine 0.0 to 12.5 mg/L
Iron 0.00 to 1.00 mg/L
pH 5.9 to 8.5 pH
Resolution Turbidity 0.01 & 0.1 NTU
Bromine 0.01 mg/L
Free Chlorine 0.01 mg/L
Total Chlorine 0.01 mg/L
Cyanuric Acid 1 mg/L
Iodine 0.1 mg/L
Iron 0.01 mg/L
pH 0.1 pH
Accuracy Turbidity ±0.5% NTU or ±5% of reading (whichever greater)
Bromine ±0.8 mg/L ±3% of reading
Free Chlorine ±0.03 mg/L ±3% of reading
Total Chlorine ±0.03 mg/L ±3% of reading
Cyanuric Acid ±1 mg/L ±15% of reading
Iodine ±0.1 mg/L ±5% of reading
Iron ±0.02 mg/L ±3% of reading
pH ±0.1 pH
Typical EMC Deviation Turbidity ±2% Full Scale
Bromine ±0.01 mg/L
Free Chlorine ±0.01 mg/L
Total Chlorine ±0.01 mg/L
Cyanuric Acid ±1 mg/L
Iodine ±0.1 mg/L
Iron ±0.01 mg/L
pH ±0.1 pH
Light Source/Life Pure Green LED / Life of the instrument
Light Detector Two Silicon Photocells
Battery Type/Life 4 x 1.5V AA batteries 60 hours or 1,000 measurements / Auto-shut off user-selectable from 10, 20, 30, 40, 50 or 60 minutes
Environment 32 to 122°F (0 to 50°C); RH 95%
Dimensions 8.7 x 3.3 x 1.8" (220 x 83 x 46 mm)
Weight 18 oz. (510 g)

* 1 FTU (Formazine Turbidity Unit) = 1 NTU (Nephelometric Turbidity Unit)

 

Giangarlo Scientific | Analytical | Environmental | Life Science | Process | Safety | Wastewater | Service | Contact Us